Pairing a wireless headset with the IP Phone 93A searching message is displayed.If the search is successful, a list of devices that support Bluetoothwireless technology appears in the Found combo box.c. When your headset appears in the Found: combo box, pressStop, or wait for the search to finish. Go to step 5.d. If the search is not successful, the following message isdisplayed: Search completed. No device found. Repeat step3 and step 4.5 Perform one of these actions:• If your headset is displayed in the Found: combo box, proceedto step 6.• If your headset does not appear in the Found combo box,perform these steps:— Press the right navigation key one or more times to selectthe Found: combo box.— Press the send key to start the edit mode.— Press the down navigation key to open the list.— Scroll through the list and highlight your headset.— Press the send key to select the headset.— Press the send key again to exit the edit mode.6 Press the right navigation key one or more times to select the Pairbutton.7 Press the send key.A dialog box appears, prompting you to enter a PIN.8 Enter the PIN of the headset, and press the send key.9 To verify that the pairing was successful, scroll through the list to seeif the headset appears beside the Paired item. A pair completedmessage also appears at the bottom of the screen.10 If the headset is successfully paired with your phone, go to step12. If the headset is not successfully paired with the IP Phone, goto step 1111 If the headset is not successfully paired with the IP Phone, an errormessage appears at the bottom of the screen. Perform these steps:Carrier VoIPNortel IP Phone 1140E User GuideNN10300-023 01.03 Standard(I)SN09U 13 April 2007Copyright © 2007, Nortel Networks Nortel Networks Confidential.
