58 Using the Feature menu2 On the terminal, select the key that you want to assign to a differentfeature.3 From the Feature menu, select and open Assign.4 Press Ok, or press the send key.The Assign menu opens.—End—Defining the key typeFollow this procedure to define the key type.Each feature key can be defined in one of two ways: Central or Local. Afeature key defined as Central can have a Centrex feature, such as CallForward, assigned to it. A feature key defined as Local can have a directoryentry assigned to it. By default, all feature keys are defined as Central.For further information about Centrex features, see Nortel CICMFundamentals (NN10044-111).Step Action1 From the main menu, open the Feature menu.A list of the feature keys and their current assignments appears.2 Select a key to change.The Feature submenu appears.3 Select and open Assign.If the key you selected in step 2 is assigned to a Centrex feature,these soft key labels appear: Key Type and Autoscroll.If the selected key is assigned to a local feature, these soft key labelsappear: Key Type and Feature.4 Press Key Type.The Key Type screen appears. A check mark appears beside thetype currently assigned to the key.5 Perform one of these actions:• To change Central to Local, select Local.• To change Local to Central, select Central.6 Press Ok, or press the send key.Carrier VoIPNortel IP Phone 1140E User GuideNN10300-023 01.03 Standard(I)SN09U 13 April 2007Copyright © 2007, Nortel Networks Nortel Networks Confidential.
