Nortel 2000 User Manual
Also see for 2000: Administration guidePre-installation instructionsQuick start guideRelease noteIntegration guide
                                                                                      | |
Contents
| 
Book B-9Chapter 1 Network AdministrationRemote Annex Administrator’s Guide for UNIXBook BSLIP StatisticsThe netstat –iS command displays SLIP data after the hardware interfacestatistics:annex01# netstat –iS*** Hardware Interface Statistics ***SLIP rcvr:intrs 0, loops 0, bytes 0, pkts 0bytes/intr 0, bytes/loop 0, bytes/pkt 0hiwaters 0, overflows 0, mbuf waits 0, mbuf kicks 0overruns 0, ipintrq full 0FRAME_ENDs 0, FRAME_ESCs 0, proto errs 0, last proto err 0SLIP xmit:intrs 13, starts 22, vectors 108, bytes 1874, pkts 13FRAME_ENDs 22, FRAME_ESCs 32bytes/intr 144, bytes/vec 17, vec/pkt 8, bytes/pkt 144Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Collisen0 1500 192.9.200 annex1 648918 0 352845 0 0lo0 1536 127 127.0.0.1 0 0 0 0 0asy6 1006 192.9.200 annex1 0 0 0 0 0asy13 256 192.9.200 annex1 0 0 0 0 0Ethernet Address: 00-80-2d-00-14-3dFrames Received: 705482 Frames Transmitted: 35283Bytes Received: 62425605 Bytes Transmitted: 193578CRC Errors: 0 Alignment Errors: 0Bad Type/Length Fields:0 Buffer Drops: 0FIFO Drops: 0 Interface Resets: 1TX DMA Underruns: 0 RX DMA Overruns: 0Carrier Sense Losses: 0 Clear to Send Losses: 0Collisions Detected: 2389 Max Collision Retries:0 |
Related manuals for Nortel 2000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine