332 Appendix K Log descriptionsNN47922-501Log commandsGo to the command interpreter interface (see Appendix H, “CommandInterpreter” on page 271 for information on how to access and use thecommands).Local User Database does notsupport authentication method.The local user database only supports theEAP-MD5 method. A user tried to use anotherauthentication method and was not authenticated.User logout because of sessiontimeout expired.The router logged off a user whose sessionexpired.User logout because of userdeassociation.The router logged off a user who ended thesession.User logout because of noauthentication response fromuser.The router logged off a user from which there wasno authentication response.User logout because of idletimeout expired.The router logged off a user whose idle timeoutperiod expired.User logout because of userrequest.A user logged off.Local User Database does notsupport authentication mothed.A user tried to use an authentication method thatthe local user database does not support (it onlysupports EAP-MD5).No response from RADIUS. Plscheck RADIUS Server.There is no response message from the RADIUSserver, check the RADIUS server.Use Local User Database toauthenticate user.The local user database is operating as theauthentication server.Use RADIUS to authenticateuser.The RADIUS server is operating as theauthentication server.No Server to authenticate user. There is no authentication server to authenticatea user.Local User Database does notfind user`s credential.A user was not authenticated by the local userdatabase because the user is not listed in thelocal user database.Table 94 IEEE 802.1X logsLog Message Description
