98 Chapter 6 Remote Node setupNN47922-501Traffic Redirect setupConfigure parameters that determine when the Business Secure Router forwardsWAN traffic to the backup gateway using Menu 11.1.5 — Traffic RedirectSetup.Figure 33 Menu 11.1.5: Traffic Redirect setupTable 24 describes the fields in Figure 33.Menu 11.1.5 - Traffic Redirect SetupActive= YesConfiguration:Backup Gateway IP Address= 0.0.0.0Metric= 15Check WAN IP Address= 0.0.0.0Fail Tolerance= 3Period (sec)= 5Timeout (sec)= 3Press ENTER to Confirm or ESC to Cancel:Table 24 Menu 11.1.5: Traffic Redirect setupField Description ExampleActive Press [SPACE BAR] and select Yes (to enable) or No (todisable) traffic redirect setup. The default is No.YesConfiguration:BackupGateway IPAddressEnter the IP address of your backup gateway in dotteddecimal notation.The Business Secure Router automatically forwards trafficto this IP address if the Business Secure Router Internetconnection terminates.0.0.0.0Metric Enter a number from 1 to 15 to set this route’s priorityamong the Business Secure Router routes. The smallerthe number, the higher priority the route has.15(default)
