208 System administrationAfter the update procedure is finished, the handset continues touse the old firmware packet.17 When the update is complete, click Remove Ready Handsets.18 To activate the new firmware, restart the handset.There are two options in restarting the handset.• If the handset is in the charger, the handset automaticallyexecutes a restart. No manual intervention needed.• If the handset is not in the charger and you want to activatethe new software immediately, switch off the handset andswitch it on again. After the handset switches over to the newfirmware packet, the message Firmware Update in progress.Do not switch off. appears.19 After the update process is finished, clean up the handsets listusing one of the following menu items.• Remove Handsets• Remove Ready Handsets20 Click Statistics if you want an overview of the all actions thattake place. A window appears.--End--Central directory access toolThe Central directory access tool connects a directory to the SIP DECTsystem.Note: The Central Directory Access feature is available only for thehandsets that support it.After the Central directory access tool is installed, the tool consists of twoservices running under MS Windows. There is no user interface available.TCP/IP Port 30160 is open for external access from the IP DECT system.IP DECT connects to the Central directory access tool through the TCP/IPsocket that is defined in the DAP Configurator tool.For access to the database, the handset type must support access to thedatabase through the menu in the handset. If the handset does not offer amenu option to access the Central Directory, Central Directory cannot beused on that handset type. Consult your SIP DECT supplier to find out thehandset types that support Central Directory dialling.Nortel Communication Server 1000SIP DECT FundamentalsNN43120-123 01.076 January 2009Copyright © 2008-2009 Nortel Networks.
