246 Location builder toolThe RPN and Info fields are automatically populated. Ensurethat the values are correct, and click OK.A DAP is created at the position you specified in the Add DAPdialog.18 After the building of the Location is complete, select one or moreof the following options.• In the menu, choose File > Save to save the location file asan .xml file. You can later import this file into the DAP SyncAnalyzer tool.• Export the location file as a .csv file that can be used inthe DAP Sync Analyzer. This file does not contain buildinginformation. This .csv file contains DAP information only.• Export the Dummy visibility file as a .txt file. This creates aflat synchronization hierarchy. This .txt file can be used only ifno realistic visibility file can be obtained.• Export the RPNadm file as a .txt file. This file contains theRPN data as you setup in the Location Builder tool. Normallythe RPNadm file contains the RPN data provided in theimported RPNadm.txt file.--End--MaintenanceYou can make changes in the Location configuration after the Locationfile is created, for example:• You can make minor configuration changes, excluding RPNadm data.To make minor changes in the configuration, you can import theLocation file, and then select the item that has to be updated. You canedit the properties of the selected item using the Edit box.• You can update the RPNadm.txt data using the update utility that ispart of the RPNadm.txt import function. To do so, import an updatedRPNadm.txt file, and select the Update DAPs already located option.If necessary, select whether the MAC address or RPN is to takeprecedence. Choosing between RPN and MAC Address is necessaryNortel Communication Server 1000SIP DECT FundamentalsNN43120-123 01.076 January 2009Copyright © 2008-2009 Nortel Networks.
