DAP deployment 67Figure 42Deployment Kit 2 basestationDAP deploymentTo deploy a DECT system follow Procedure 12 “Deploying a DECTsystem” (page 67).Procedure 12Deploying a DECT systemStep Action1 Identify and mark initial critical points.Mark critical initial points on the floor plan with the followingsymbol.Figure 15 "Example of initial critical points" (page 43) shows theinitial critical points: P1, P2, P3, P5, P6 and P7.2 Demarcate the cell contour for the critical point farthest from thecenter of the full coverage area.To demarcate a cell contour, perform the following.Nortel Communication Server 1000SIP DECT FundamentalsNN43120-123 01.076 January 2009Copyright © 2008-2009 Nortel Networks.
