Use the Location builder tool 241— RPN numbers— MAC addresses— Info fieldThe DAP list shows a list of DAPs that are not yet on themap. You can drag these DAPs onto map.Populate the DAP list by adding new DAPs to theRPNadm.txt file, using menu item File > Import.• In the Edit box area, you can edit properties of the selectedlocation, building, or DAP. After editing the values in the Editbox, click Set to save your changes.• Use the Floor controls to add or delete a floor or set thelocation of a floor.• Use the Draw controls to add a DAP, a building, or a line.• Use the View controls to change the view of the Map pane.• Use the Options controls to customize display options.--End--Create a location fileUse the steps in the following procedure to create a location file.Prerequisites• Ensure that you have up-to-date maps of the building(s). You canimport a map of a building or floor from a bmp, .gif and .jpg file.• Ensure that you have a clear understanding of the sizes of the areaand the buildings. Ensure that the maps use a common scale; if theydo not, ensure that you understand how they differ.Use the steps in the following procedure to create a location file.Procedure 119Creating a location fileStep Action1 To start the DAP configurator tool through the Start menu,choose Start > All programs > DAP controller > DAPApplications > Location Builder.The Location builder main screen appears.Nortel Communication Server 1000SIP DECT FundamentalsNN43120-123 01.076 January 2009Copyright © 2008-2009 Nortel Networks.
