Viewing the last diagnostics result 571 Run CallPilot Manager and log on.2 In CallPilot Manager, click Maintenance > Maintenance Admin.Result: The Maintenance screen appears.3 Click the plus sign (+) beside the CallPilot server to expand thecomponent tree.4 Continue clicking the plus signs (+) until the component you want towork with is visible.5 Click the hardware component for which you want to run diagnosticswith.Result: The Maintenance screen refreshes to show details aboutthe component.6 Scroll down to the Maintenance section, and ensure that thecomponent is out of service.7 Scroll down to the Diagnostics section.8 Select the check box for each diagnostic that you want to run.Note: If you want to run all of the diagnostics, select theDiagnostic Description check box at the top of the list.9 Click Run.Result: A new Web browser window appears with the progressand results of the diagnostics.Note: The Diagnostic Results box in the Diagnostics sectionappears when you click Get Last Result.—End—Viewing the last diagnostics resultYou can review the results of diagnostics by clicking the Get Last Resultsbutton for a component.To view the last diagnostics resultStep ActionATTENTIONNortel recommends that you courtesy stop rather than stop a component ifpossible. For instructions, see "Starting and stopping components" (page 53).Nortel CallPilot1005r Server Maintenance and DiagnosticsNN44200-704 01.06 Standard5.0 19 July 2007Copyright © 2007, Nortel Networks.
