Nortel CallPilot User Manual

Also see for CallPilot: User guide Supplementary guide Configuration manual User guide Reference guide

Contents

Nortel CallPilot User Manual Manual pdf 93 page image

Replacing the software feature key 9316 Restart the server.—End—Replacing the software feature keyIf you upgrade your system or convert it to high capacity, you must replacethe software feature key with a new key.To replace the software feature keyStep Action1 Remove the new software feature key from the plastic bag.2 Eject the old software feature key by inserting a straightened paperclip into the side access hole.3 Push the paper clip in the direction of the software feature key.4 Insert the new software feature key into the software feature slot onthe dongle with the data contact facing down and away from theembossed i.Dongle with open slotIn the following figure, label 1 is the data contact and label 2 is theground.Nortel CallPilot1005r Server Maintenance and DiagnosticsNN44200-704 01.06 Standard5.0 19 July 2007Copyright © 2007, Nortel Networks.