18-2 Introducing the SMT317517-A Rev 00Figure 18-1 Initial Screen18.2.2 Entering the PasswordThe login screen appears after you press [ENTER], prompting you to enter the password, as shownbelow.For your first login, enter the default password “setup”. As you type the password, the screendisplays an “X” for each character you type.Please note that if there is no activity for longer than five minutes after you log in, your Contivity221 will automatically log you out and display a blank screen. If you see a blank screen, press[ENTER] to bring up the login screen again.Figure 18-2 Password Screen18.3 Navigating the SMT InterfaceThe SMT is an interface that you use to configure your Contivity 221.Several operations that you should be familiar with before you attempt to modify the configurationare listed in the table below.Table 18-1 Main Menu CommandsOPERATION KEYSTROKES DESCRIPTIONMove down toanother menu[ENTER] To move forward to a submenu, type in the number of the desiredsubmenu and press [ENTER].Move up to aprevious menu[ESC] Press the [ESC] key to move back to the previous menu.Enter Password : XXXXCopyright (c) 1994 - 2002 Nortel Networks.initialize ch =0, ethernet address: 00:a0:c5:41:51:61initialize ch =1, ethernet address: 00:a0:c5:41:51:62Press ENTER to continue...
