20-10 WAN and Dial Backup Setup317517-A Rev 0020.8 Editing TCP/IP OptionsMove the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press[ENTER] to open Menu 11.3 - Network Layer Options.Figure 20-6 Menu 11.3: Remote Node Network Layer OptionsThe following table describes the fields in this screen.Table 20-7 Remote Node Network Layer Options Menu FieldsFIELD DESCRIPTION EXAMPLEIP AddressAssignmentIf your ISP did not assign you an explicit IP address, press [SPACEBAR] and then [ENTER] to select Dynamic; otherwise select Static andenter the IP address & subnet mask in the following fields.Dynamic(default)Rem IPAddressLeave this field set to 0.0.0.0 to have the ISP or other remote routerdynamically (automatically) send its IP address if you do not know it.Enter the remote gateway’s IP address here if you know it (static).0.0.0.0(default)Rem SubnetMaskLeave this field set to 0.0.0.0 to have the ISP or other remote routerdynamically send its subnet mask if you do not know it. Enter the remotegateway’s subnet mask here if you know it (static).0.0.0.0(default)Menu 11.3 - Remote Node Network Layer OptionsIP Address Assignment= DynamicRem IP Addr= 0.0.0.0Rem Subnet Mask= 0.0.0.0My WAN Addr= 0.0.0.0Network Address Translation= NoneMetric= 15Private= NoRIP Direction= BothVersion= RIP-2BMulticast= NoneEnter here to CONFIRM or ESC to CANCEL:
