20-6 WAN and Dial Backup Setup317517-A Rev 00Table 20-4 Advanced WAN Port Setup: Call Control ParametersFIELD DESCRIPTION DEFAULTRetry Interval(sec)Enter a number of seconds for the Contivity 221 to wait beforetrying another call after a call has failed. This applies before aphone number is blacklisted.Drop Timeout(sec)Enter a number of seconds for the Contivity 221 to wait beforedropping the DTR signal if it does not receive a positive disconnectconfirmation.20 secondsCall Back Delay(sec)Enter a number of seconds for the Contivity 221 to wait betweendropping a callback request call and dialing the co-respondingcallback call.15 seconds20.6 Remote Node Profile (Backup ISP)Enter 2 in Menu 11 Remote Node Setup to open Menu 11.1 Remote Node Profile (Backup ISP)(shown below) and configure the setup for your Dial Backup port connection. This feature is notavailable on all models.Figure 20-4 Menu 11.1 Remote Node Profile (Backup ISP)The following table describes the fields in this screen.Menu 11.1 - Remote Node Profile (Backup ISP)Rem Node Name= ? Edit PPP Options= NoActive= Yes Rem IP Addr= 0.0.0.0Edit IP= NoOutgoing: Edit Script Options= NoMy Login=My Password= ******** Telco Option:Authen= CHAP/PAP Allocated Budget(min)= 0Pri Phone #= ? Period(hr)= 0Sec Phone #= Nailed-Up Connection= NoSession Options:Edit Filter Sets= NoIdle Timeout(sec)= 100Press ENTER to Confirm or ESC to Cancel:
