31-1Contivity 221 VPN Switch User’s GuideChapter 31System Maintenance Menus 8 to 10This chapter leads you through SMT menus 24.8 to 24.10.31.1 Command Interpreter ModeThe Command Interpreter (CI) is a part of the main router firmware. The CI provides much of thesame functionality as the SMT, while adding some low-level setup and diagnostic functions.Enter the CI from the SMT by selecting menu 24.8. Access can be by Telnet or by a serialconnection to the console port, although some commands are only available with a serialconnection. See the included disk or nortelnetworks.com for more detailed information on CIcommands. Enter 8 from Menu 24 - System Maintenance.Use of undocumented commands or misconfiguration can damage the unit andpossibly render it unusable.Figure 31-1 Command Mode in Menu 24Menu 24 - System Maintenance1. System Status2. System Information and Console Port Speed3. Log and Trace4. Diagnostic5. Backup Configuration6. Restore Configuration7. Firmware Update8. Command Interpreter Mode9. Call Control10. Time and Date Setting11. Remote Management SetupEnter Menu Selection Number:
