63Set-to-Set MessagingSet-to-Set MessagingWith the Set-to-Set Messaging application activated, an internal caller using anM3903, M3904, or M3905 receives a quick visual message, which you haveselected, whenever they dial your telephone number. The length of your messageis limited to 24 characters. The message is entered through the dial pad keysusing a process similar to the one used for entering names in the PersonalDirectory. Your network administrator may provide access to a list of up to tenmessages which you may customize and select as your current set-to-set message.Only one message at a time may be customized and only one message can bestored in your telephone’s memory.You can check your Call Log to determine whether or not a caller was sent theset-to-set message. A will appear beside the call log entry of the callers whosaw your message. Note: This feature is not available on the Meridian SL-100.To access Set-to-Set Messaging:1. Press the Applications Key.2. From the Applications menu, use theNavigation Keys to highlight Set toSet Messaging.3. Press the Select Key.The Set-Set Msg screen appearsindicating the status of the feature (onor off) and whether or not a messageis stored (defined) in memory.Note: If you have activated passwordprotection on your Directory/Log, you willneed to enter your password to continue.To edit the currently stored message,or to create a new message:1. Press the Edit Key.App'sSet to Set MessagingSelectEdit