Nortel TAPI User Manual
                                                        | |
Contents
| 
14 Adding server functionality to Norstar TSPNorstar TSP Server Configuration Guide P0605043 Issue 01Adding server functionality to Norstar TSPNorstar TSP is set to single user mode by default. You must upgrade Norstar TSPbefore you can use server functionality. Server functionality allows Norstar TSP toshare the CTA connected to Server with other Norstar TSP users. To use the serverfunctionality, your computer must have a network connection and be runningWindows NT Server 4.0.To add server functionality, use the Norstar TSP Authorization Code and theNorstar TSP Site Code to obtain a Norstar TSP Security Key Code.Your Norstar TSP Site Code is a temporary number that contains information aboutthe CTA device id and the number of station licenses installed. Therefore, theNorstar TSP Site Code changes when the CTA device changes or when you upgradeor attempt to upgrade the number of station licenses. This means that the NorstarTSP Security Key Code is good for only one successful upgrade.For information about upgrading to add server functionality, refer to the NorstarTSP Station License Upgrade Guide.Note: Under some conditions (e.g. a busy processor), rebooting the Server maycause a Plug-and-Play re-enumeration of the CTA. If the CTA waspreviously installed and functioning correctly, shutdown the Server andrestart. Do not re-install the device. Re-installing will cause the NorstarTSP Security Code to expire.Configuring Norstar TSP on the Windows NT 4.0 ServerYou must configure the Norstar TSP Server before network users can use it toaccess Norstar TSP. You configure the Server using the Telephony ControlManager software.The Telephony Control Manager (TCM) software is made by MicrosoftCorporation. This software consists of two applications: TCMSETUP andTCMAPP. Use TCMSETUP to setup and enable/disable telephony services for theclient and the server. Use TCMAPP on the server to configure the associationsbetween Norstar sets and Windows domain user accounts.Note: Ensure that Norstar TSP is installed, configured, and running before settingup TCMAPP.To configure the Norstar TSP server you must:• enable the Norstar TSP Server• add Norstar TSP clients to the Norstar TSP server• assign telephones to Norstar TSP clients |
Related manuals for Nortel Norstar TAPI Service Provider 4.3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine