50 Starting Norstar TSPNorstar TSP Server Configuration Guide P0605043 Issue 01Norstar TSP tipsStarting Norstar TSPTAPI server starts up when any TAPI application or service is launched (e.g. RAS,Norstar TSP Service). During start up, TAPI server acquires all of the telephonesidentified in the TAPI User Configuration. Acquiring the telephones runs in thebackground and can take as long a five seconds to for each telephone. If you havea TAPI service setup to start at boot time, the Server’s startup may take a numberof minutes to complete. For example, if you have a Server configured with 50telephones, initialization of TAPI server can add four minutes to the server startuptime.Windows attempts to re-install the CTAUnder some conditions (e.g. a busy processor), rebooting the Server may cause aPlug-and-play re-enumeration of the CTA. If the CTA was previously installed andfunctioning correctly, shutdown the Server and restart. Do not re-install thedevice. Re-installing will cause the Norstar TSP Security Code to expire.
