Nortel TAPI User Manual

Contents

Nortel TAPI User Manual Manual pdf 27 page image

Adding Norstar TSP Clients to the Norstar TSP Server 27P0605043 Issue 01 Norstar TSP Server Configuration Guide4. On the Setup tab, click on the Enable Telphony server check box to enablethe server.Note: If the Enable telephony server check box is unavailable, start the Telephonyservice.On your desktop, click Start, point to Settings, then click Control Panel.Double-click on Administrative Tools.Double-click on Services.Right-click Telephony, then click Start.5. After you enable the server, specify a logon account in the AccountInformation area.Note: The logon account you specify must be a member of the Administratorsgroup on the server. It must also be in the same domain as the server or in adomaint hat has a two-way trust relationship with the domain containing theserver.Adding Norstar TSP Clients to the Norstar TSP ServerRefer to Adding Norstar TSP clients to the Norstar TSP server on page 16.Assigning a telephone to a Norstar TSP clientFor each Norstar TSP client, you must assign an extension number to their networkUser ID. The Norstar TSP server uses this information to ensure that the correcttelephone is controlled by a Norstar TSP client.1. In the console tree of the Telephony command console, click the serviceprovider you want to manage. The following dialog appears:2. In the details pane, under Line Name or Phone Name area, click theappropriate line or telephone.