Nortel TAPI User Manual

Contents

Nortel TAPI User Manual Manual pdf 31 page image

Configuring TAPI Client on a client PC 31P0605043 Issue 01 Norstar TSP Server Configuration GuideConfiguring TAPI Client on a client PCYou must configure each client PC to work with the Norstar TSP server.Note: The dialog boxes shown in this section for Dialing Properties are thosewhich appear on a Windows 95 system. These boxes will be different inWindows 98, Windows NT 4.0 Workstation, Windows 2000 Professional,and so on.To configure the client PC you must:• configure the network settings• log on to the Norstar TSP server• set the dialing properties• restart the client PCConfiguring the network settings on the client PCFor the client PC to communicate with the Norstar TSP server, there are twonetwork settings required.The client PC must be in the same domain as the Norstar TSP server.The client PCs can only be logged in to one domain at any one time. Remove theclient PCs from any prior domains before proceeding with setting up the client.The Access Control must be set to User level.On Windows 95 client machines, you must ensure the File and Print Sharing areboth enabled with user level access control.To set the Access Control on the client PC:1. On the client PC, click the Start button.2. Point to Settings and then click Control Panel.3. Double click the Network icon.