Nortel Voice Mail 4.0 FAX Set Up And Operation Manual

Also see for Norstar Voice Mail 40 Fax: User guide Installation guide

Contents

Nortel Voice Mail 4.0 FAX Set Up And Operation Manual Manual pdf 68 page image

68 Appendix B: Dialing TranslationFAX Set Up and Operation Guide P0886629 Issue 1.0An example of a Dialing Translation Table created using a basic text editor.Technician Created Dialing Translation TableInstalling the Dialing Translation Table onto the Norstar Voice Mail Sys-temThere are four distinct steps for installing the Dialing Translation Table file onto theNorstar Voice Mail system.• Create a DOS system disk.• Create an Autoexec.bat file.• Load the Dialing Translation Table file (dial.20) and the Autoexec.bat file ontothe DOS system disk.• Load the Dialing Translation Table file onto the Norstar Voice Mail system.Creating a DOS system diskA DOS system disk is a floppy disk that has system files copied onto it. This typeof disk is required to automatically load the dialing translation table file onto theNorstar Voice Mail system.To create a DOS system disk:1. Insert a blank 3.5" disk into the floppy disk drive of a DOS compatiblecomputer.2. Ensure the DOS prompt is on the computer screen.3. Type Format a: /s and follow the instructions shown on the screen.Note: The default name for the floppy disk drive is a:. However, oncomputers with two disk drives, the 3.5" drive may be named b:. If thedrive is named b:, replace a: with b: in the above command. If you areunsure of the name of the 3.5" floppy disk drive, check the usermanuals for your computer.INPUT OUTPUT Explanation011 011 First entry in the Dialing Translation Table.416 - The Input value is 416 and the Output value is null.905206 905206 These specific 905 telephone exchanges appear before the moregeneric 905 entry.90527 90527905 1905 The generic 905 sub-string must appear after the longer morespecific 905 strings.9011 # 9011 is a restricted DN.- 1 The Input value is null and the Output value is 1.