Nortel Voice Mail Software Manual

Contents

Nortel Voice Mail Software Manual Manual pdf 38 page image

38 Upgrading a Norstar Voice Mail system with a 270 MB hard disk driveNorstar Voice Mail 4.1 Software Upgrade Guide P0994576 Issue 01Testing the Norstar Voice Mail softwareAfter you have completed the upgrade you must test the Norstar Voice Mail 4.1software to make sure it is functioning. Refer to "Testing the Norstar Voice Mailsoftware" on page 38.Backing up Norstar Voice Mail programing after the upgradeFor system security, perform a backup of the Norstar Voice Mail programing andthe capabilities file after completing the upgrade process. For more information onbacking up the Norstar Voice Mail programing and the capabilities file, refer to"Backing up Norstar Voice Mail programing" on page 15 and "Backing up theNAM capabilities file" on page 16.Re-installing Cintech Dial-by-NameThe methods used to upgrade the system software will may causeDial-by-Name (DBN) to fail to load after the system is rebooted. To re-install theDial-by-Name (DBN), refer to "Updating Cintech Dial-by-Name" on page 23.Re-enabling the monitor, keyboard and mouseIf you have a monitor, keyboard and mouse attached to your system, you must re-enable the monitor after the upgrade.To enable the monitor, keyboard and mouse:1. Press Ä áÚÞ .2. Enter the ACCESS password. The default passwordis ACCESS2 (2223772).3. Press ADMIN .4. Press NEXT until the display shows G.ºMonitorºPkg.5. Press SHOW .6. Enter the default passwordà¡ÝÛßÜÜÜÜÜ(SVGANEEDED).7. Press ADD .Password:ºººººººº ºº RETRYAccess ServerBACKº NEXTº ADMINA.ºPrtºqueueºmgrQUITºº NEXTºº SHOWG.ºMonitorºPkgQUITºº NEXTº º SHOWPassword:QUITºººº º º RETRYMonitor?QUITº º ADDººº REM