Figure 5-5 Edit the Schedule and Task Type(2) Choose the day you want to set the task schedule.(3) Click All Day to set the schedule as all day; or click Customize and input the Start Timeand End Time for each task, and click Enter on your keyboard to enter the time.(4) Choose the task type from the drop-down list. You can choose scan, preset, pattern, etc.(5) (Optional) After you set the scheduled task, you can copy the task to other days.(6) Click to save the settings.The time of each task can’t be overlapped. Up to 10 tasks can be configured for eachday.5. Click to save the settings.5.5 Configuring Park ActionsPurpose:This feature allows the dome to start a predefined park action (scan, preset, pattern and etc.)automatically after a period of inactivity (park time).Scheduled Tasks function is prior to Park Action function. When these two functionsare set at the same time, only the Scheduled Tasks function takes effect.Steps:1. Enter the Park Action Settings interface:Configuration > Advanced Configuration> PTZ > Park Action
