Chapter 6 Speed Dome Configuration6.1 Configuring Local ParametersThe local configuration refers to the parameters of the live view and other operationsusing the web browser.Steps:1. Enter the Local Configuration interface:Configuration > Local ConfigurationFigure 6-1 Local Configuration Interface2. Configure the following settings: Live View Parameters: Set the protocol type, stream type, image size and live viewperformance. Protocol Type: TCP, UDP, MULTICAST and HTTP are selectable.TCP: Ensures complete delivery of streaming data and better video quality, yet thereal-time transmission will be affected.UDP: Provides real-time audio and video streams.HTTP: Allows the same quality as of TCP without setting specific ports for streamingunder some network environments.MULTICAST: It’s recommended to select the protocol type to when usingthe Multicast function. For other information about Multicast, refer to Section 6.3.1Configuring TCP/IP Settings. Live View Performance: Set the live view performance to Shortest Delay, or Auto. Rules: You can enable or disable the rules of dynamic analysis for motion here. Image Format: The captured pictures can be saved as different format. JPEG and BMP are