Figure 7-3 Initialize DiskFigure 7-4 InitializingWhen the initialization completed, the status of disk will become Normal as shown inFigure 7-5.Figure 7-5 View Disk StatusQuota:In Storage Management interface, you can predefine the storage space for storing the picturesand videos by configuring the Percentage of Picture and Percentage of Record manually. Up to 8 NAS disks can be connected to the speed dome. To initialize and use the SD card after insert it to the speed dome, please refer to the stepsof NAS disk initialization.7.2 Configuring Recording SchedulePurpose:There are two kinds of recording for the speed domes: manual recording and scheduled recording.For the manual recording, refer to Section 4.4 Recording and Capturing Pictures Manually. Inthis section, you can follow the instructions to configure the scheduled recording. By default, therecord files of scheduled recording are stored in the SD card (if supported) or in the network disk.Steps:1. Enter the Record Schedule Settings interface:Configuration > Advanced Configuration> Storage > Record Schedule
