NVR4POE / NVR8POE / NVR16POE Series NVR User Manual1399.4.3 Checking the Network StatusPurpose:You can also check the network status and quick set the network parameters in this interface.Steps:Click the Status button on the lower- right corner of the page.Figure 9. 33 Network Status CheckingIf the network is normal the following message box pops out.Figure 9. 34 Network status checking resultIf the message box pops out with other information instead of this one, you can click Network button toshow the quick setting interface of the network parameters.9.4.4 Checking Network StatisticsPurpose:You can check the network status to obtain the real-time information of NVR.Steps:1. Enter the Network Detection interface.Menu>Maintenance>Net Detect2. Choose the Network Stat. tab.
