NVR4POE / NVR8POE / NVR16POE Series NVR User Manual14710.4 Checking HDD StatusPurpose:You may check the status of the installed HDDs on NVR so as to take immediate check and maintenance in caseof HDD failure.Checking HDD Status in HDD Information InterfaceSteps:1. Enter the HDD Information interface.Menu > HDD>General2. Check the status of each HDD which is displayed on the list, as shown in Figure 10. 14.Figure 10. 14 View HDD Status (1)If the status of HDD is Normal or Sleeping, it works normally. If the status is Uninitialized or Abnormal, pleaseinitialize the HDD before use. And if the HDD initialization is failed, please replace it with a new one.Checking HDD Status in HDD Information InterfaceSteps:1. Enter the System Information interface.Menu >Maintenance > System Info2. Click the HDD tab to view the status of each HDD displayed on the list, as shown in Figure 10. 15.Figure 10. 15 View HDD Status (2)
