NVR4POE / NVR8POE / NVR16POE Series NVR User Manual16513.2 Configuring DST SettingsSteps:1. Enter the General Settings interface.Menu >Configuration>General2. Choose DST Settings tab.Figure 13. 2 DST Settings InterfaceYou can check the checkbox before the Auto DST Adjustment item.Or you can manually check the Enable DST checkbox, and then you choose the date of the DST period.13.3 Configuring More Settings for DeviceParametersSteps:1. Enter the General Settings interface.Menu >Configuration>General2. Click the More Settings tab to enter the More Settings interface, as shown in Figure 13. 3.Figure 13. 3 More Settings Interface3. Configure the following settings:• Device Name: Edit the name of NVR.• Device No.: Edit the serial number of NVR. The Device No. can be set in the range of 1~255, and thedefault No. is 255. The number is used for the remote and keyboard control.• Auto Logout: Set timeout time for menu inactivity. E.g., when the timeout time is set to 5 Minutes, thenthe system will exit from the current operation menu to live view screen after 5 minutes of menuinactivity.• Menu Output Mode: You can choose the menu display on different video output. By default, onlyHDMITM /VGA is selectable.4. Click the Apply button to save the settings.
