NVR4POE / NVR8POE / NVR16POE Series NVR User Manual15311.2 Configuring Privacy MaskPurpose:You are allowed to configure the four-sided privacy mask zones that cannot be viewed by the operator. The privacymask can prevent certain surveillance areas to be viewed or recorded.Steps:1. Enter the Privacy Mask Settings interface.Menu > Camera >Privacy Mask2. Select the camera to set privacy mask.3. Click the checkbox of Enable Privacy Mask to enable this feature.Figure 11. 2 Privacy Mask Settings Interface4. Use the mouse to draw a zone on the window. The zones will be marked with different frame colors.Up to 4 privacy masks zones can be configured and the size of each area can be adjusted.5. The configured privacy mask zones on the window can be cleared by clicking the corresponding ClearZone1-4 icons on the right side of the window, or click Clear All to clear all zones.Figure 11. 3 Set Privacy Mask Area6. Click the Apply button to save the settings.
