NVR4POE / NVR8POE / NVR16POE Series NVR User Manual565.1 Configuring ParametersPurpose:By configuring the parameters you can define the parameters which affect the image quality, such as thetransmission stream type, the resolution and so on.Before you start:1. Make sure that the HDD has already been installed. If not, please install a HDD and initialize it.(Menu>HDD>General)Figure 5. 1 HDD- General2. Check the storage mode of the HDD.1) Click Advanced to check the storage mode of the HDD.2) If the HDD mode is Quota, please set the maximum record capacity For detailed information, seeChapter Configuring Quota Mode.3) If the HDD mode is Group, you should set the HDD group. For detailed information, see ChapterConfiguring HDD Group for Recording.Figure 5. 2 HDD- AdvancedSteps:1. Enter the Record settings interface to configure the recording parameters:Menu>Record>ParametersFigure 5. 3 Recording Parameters
