Notifier AFP-3030 Operation Manual

Also see for AFP-3030: Programming manual Operation manual Installation manual Installation manual

Contents

Notifier AFP-3030 Operation Manual Manual pdf 11 page image

AFP-3030 Operations Manual — P/N DOC-01-039:A 26/11/2015 6Message Formats General Information1.5 Message FormatsThis section describes the formats for system normal, device events and system events screens. Fora definition of these types of events, as well as instructions for dealing with them, refer toSection 2, “Operation of the Control Panel” in this manual.1.5.1 System Normal ScreenThe System Normal message appears at the top of the display when no off-normal events exist. Itconsists of two lines, each 40 characters long. Line one is a custom network message. Line 2 is astandard message giving the System Normal message. The Main Menu is selectable using the lowerright soft key.Line 4 indicates the current time and date.Figure 1.2 System Normal ScreenA custom graphic may be displayed below the system normal message: the graphic must be enteredusing VeriFire® Tools. The text “Main Menu” will overlay the graphic, if it extends into the lastline of the display.1.5.2 Event Reporting FormatThe message formats used for event reporting appear at the top of the display, replacing the SystemNormal message. There are two basic types of message formats: point event formats, which aregenerated from changes in the state of SLC and panel devices, and system event formats, which aregenerated from system errors and faults.Point Events FormatWhen a change of state occurs to an SLC or panel point device, a message is generated to the panelthat displays on the top of the LCD screen, and soft keys display available functions that may beused to handle the event. The top four lines contain the event and point information. Event countsdisplay in the next three lines, the current time and soft key information appears after the eventcounts.Other Yellow Illuminate when at least one other fault event is present on the panel.Pre Alarm Yellow Illuminate when at least one prealarm event is present on the panel.LED INDICATOR COLOR FUNCTIONTable 1.2 LED Indicators (2 of 2)L A K E V I E W G E N E R A L H O S P I T A LS Y S T E M N O R M A L1 1 : 5 8 : 4 5 A T U E D E C 2 3 , 2 0 1 4M A I N M E N U