Notifier CFP-600-E Installation And Operating Manual

CHANGE LEVEL 2 PASSWORDBy pressing ENTER, it is possible to select the level whose password has to be changed.Use CURSOR keys, to select the level number, then press ENTERto confirm.The programmable password may be made up of 1 to 4 figures (num-bers).To Enter a figure:• Select the desired number with cursor keys• Press ENTERTo accomplish the programming press ENTER a secondtime.If you do not want to modify the programming, press ESCCONFIGURATION MENU - LEVEL 4Press ENTER to go into Configuration Functions and the display will show:Press RESET key.Level 4 Password will be required.Enter the Password by using CURSOR keys.On the display will appear the first available function in theCONFIGURATION mode.Use cursor keys to display the desired function, choosing among:• CHANGE ZONES - INCLUDE/EXCLUDE STATUS• PROGRAMMING THE CBE EQUATION• CHANGE SERVICE ENABLING STATUS• CHANGE ZONE PARAMETERS• CHANGE VERIFICATION TIMES• PROGRAMMING THE RELAY MAPPING• ENABLING THE RELAY SIGNAL SILENCE• CHANGE ZONE DESCRIPTION• CHANGE SYSTEM TIME DELAY• CHANGE ALARM TIME PARAMETERS• PROGRAMMING THE ALARM CONTROL MODULATION• PROGRAMMING THE RELEASE ZONE MAPPING• CHANGE RELEASE TIME• SELECT EVENT TYPE FOR HISTORICAL LOG• PROGRAMMING THE SYSTEM NAME• CLEARING THE CONTROL PANEL MEMORY• CHANGE LANGUAGE DISPLAY• CHANGE ALL LEVEL PASSWORDSPress ESC to go back to the main screen.CFP-600-Prog-2.VP Installation and Operating Manual Page 9Doc. M-131.1-CFP600-ENG Rev. B.1 NOTIFIER ITALIATEST MODE | A08MODIFY PASSW. | G08| D00| E00MODIFY PASSW. | A08LEV. PASSW. _ | G08| D00| E00MODIFY PASSW. | A08LEV.2 PASSW._ | G082 0002 | D00| E00:User Mode | A08:Test Mode | G08:Configuration | D00:Exit | E00LEV.4 PASSW. | A08| G00| D00| E00CONFIGURAT. | A08INC./EXC.ZONES| G00| D00| E00