Notifier CFP-600-E Installation And Operating Manual

CHANGE ZONES - ENABLE/DISABLE STATUSBy using CURSOR KEYS, enter the desired zone number.By pressing ENTER key, the current status of the selected zone will bedisplayed.Press ENTER to Disable or Enable.If you do not want to change the zone status, press ESC.» NOTE: A)CHANGE DAY-NIGHT MODEBy pressing ENTER, the display will show the control panel statusTo change it, press ENTER.• NIGHT= Day/Night LED= Turned OFF• DAY= Day/Night LED = Turned ONIf you do not want to change the control panel status, press ESC.DISPLAY HISTORICAL LOGPress ENTER to display the Historical Log Function.Use CURSOR KEYS to display the eventsPress ESC to leave the Historicl Log Function» NOTE: Historical Log may store maximum 50 events.To display the Historical Log, enter the Level 2 PASSWORD.CFP-600-Prog-1.VP Installation and Operating Manual Page 5Doc. M-131.1-CFP600-ENG Rev. B.1 NOTIFIER ITALIAUSER MODE |A08ENA./DIS.ZONE |G08|D00|E00ENA./DIS.ZONE |A08Z. |G08|D00|E00ENA./DIS.ZONE |A08Z. 01 NORMAL |G08|D00Modify Exit |E00 Zone Status Detector Alarms Detector TroublesEnabled YES YESDisabled NO YESExcluded NO NOB) if a zone is DISABLED, it detects only troubles.(See config. Menu - Lev.4 about “Exclusion function”)USER MODE |A08DAY-NIGHT |G08|D00|E00|A08>NIGHT< |G08|D00Modify Exit |E00USER MODE |A08HISTORICAL LOG |G08|D00|E00HISTORICAL LOG |A0801: 14-04 17:31|G08Z.01 ALARM |D00HIST. LOG |E00DateEvent nr.Zone nr.HOURS-MINUTESEventProgrammableLabel mappedto the zone