Novation Super Bass Station Owner's Manual

Also see for Bass Station Rack: Owner's manual

Button 8 - CV / Gate ChRelated groups of parameters are in “Pages” within each button. This button is used toaccess the CV / Gate Interfaces parameters.Pages exist within this button and they are selected by pressing button 8 again. Refer to the Ident Map on the outside backcover of this manual for more details. To change the value of any parameter use the “Data Entry / Portamento” Rotary con-trol. Fine increments of parameters values can be set using the “-” and the “+” Buttons.Page 1 - CV / Gate MIDI ChannelIdent ValueThis display will alternate between “CH” ident ( CV / Gate MIDI Channel ) and it’s value. Use the Data Entry / PortamentoRotary control to adjust the value of this parameter. This parameter controls which MIDI channel the MIDI to CV / Gate out-puts will respond to. The range is “oF” and “01” to “16”. In the “oF” position there is no output from the CV / Gate outputs. inthe “01” position any MIDI notes received on MIDI Channel 1 will be converted as sent from the CV /Gate outputs.NOTE: This must be a monophonic line. CV / Gate interfaces are not polyphonic.This parameter is memorised as Global.Data Entry/ProgramUtilities/CV/Gate54MIDI RX CHMIDI TX CHPROGRAMEDIT WRITEUTILITYSAVEMIDI RX CHMIDI TX CHPROGRAMEDIT WRITEUTILITYSAVECV / GATE CH8