Chapter 12: Customizing Installations Using TunerChanging Add/Remove Program SettingsAdminStudio 9.5 User Guide ADS-0950-UG00 1041Reordering Server LocationsTask: To change the order in which additional server locations are accessed:1. Select Server Locations from the checklist. The Server Locations View opens.2. Select a server entry from the Addition Server Location Paths window.3. Depending on whether you want to promote the server location or demote it, click the up and down arrowbuttons at the top right of the view ( ). You can also use the Alt+Up Arrow and Alt+Down Arrow keyboardshortcuts.4. Repeat with other server location entries as necessary.Changing Add/Remove Program SettingsThe Windows 2000 and Windows XP Add/Remove Programs in Control Panel differs from the previous Windowsoperating systems in many ways. Depending on how the Windows Installer setup is configured, the user has theoption of removing, repairing, or changing the installation with the click of a button.Windows 2000 and XP users are also able to access additional information in Add/Remove Programs in ControlPanel not available on previous platforms. With this information, it is easier for your end users to find technicalsupport links and phone numbers, product update information, and information about your company.Topics in this section include the following:• Changing Add/Remove Programs Properties• Disabling the Modify, Remove, or Repair ButtonsChanging Add/Remove Programs PropertiesTask: To change properties in the Windows 2000 or XP Add/Remove Programs:1. Select Add/Remove Programs from the checklist. The Add/Remove Programs View opens.2. Double-click the value for the property you want to change.3. Either enter the information into the properties grid, or use the drop-down menu to select a value.
