Chapter 13: Identifying and Resolving Application Conflicts Using ConflictSolverGenerating ReportsAdminStudio 9.5 User Guide ADS-0950-UG00 11318. Save the report file under the following folder:AdminStudio Installation Directory\ConflictSolver\ Reports\Standard\MSStep 6: Adding ParametersStandard ConflictSolver reports require at least two parameters to be defined in the report file.Task: To add parameters:1. From the Insert menu, select Parameter Field.2. Click on New from the toolbar or press Ctrl+N.3. Type the parameter name as ProductName and leave the type to default value of String.4. Repeat this step and add one more parameter named ProductVersion of type String.5. Click Close.ConflictSolver automatically passes values for these parameters. In ConflictSolver when the report is selected fromthe main menu item, these parameters are passed as *; and when the report is selected by right clicking on thepackage, ConflictSolver passes the ProductName and ProductVersion for the selected package.For this report, a prompt is needed so you can enter an INI file name, and based on that, show the filtered record.This requires another parameter.Task: To add the third parameter:1. From the Insert menu, select Parameter Field.2. Type the parameter name as INIFileName.3. Set the type to String.4. Type the following into the Prompting Text text box:Enter the INI File Name. Use * as a wildcard character.5. Click OK.6. Click Close to dismiss the Field Explorer dialog box.
