Chapter 20: Analyzing Installations Prior to DeploymentViewing Predeployment Test Results1556 ADS-0950-UG00 AdminStudio 9.5 User Guide2. Click Post Results. The results of the diagnostic tests are then listed in the Status window.3. Review the results of the diagnostic tests. If you find an error message that could be resolved by making aminor adjustment to your system, such as adjusting your server settings, you could make that adjustment andclick Post Results again. The Diagnostic Tool will run the diagnostic tests again (without having to launch thetest-ready package installation again) and generate new results. You can then check to see if your adjustmentfixed the problem.4. When you have finished reviewing the results of the diagnostic tests, click Exit.The installation of the test-ready package now finishes, and the results of the diagnostic tests are entered inthe Predeployment Test Web Service Application Catalog, and, if you specified the log option, into the log file.Note • If an instrumented package is run in silent mode and PD_RUN_DIAGNOSTICS is set, the Diagnostic Toolinterface will not be displayed, but it will still run the diagnostic tests and write the results to the log file.Viewing Predeployment Test ResultsUse the View Predeployment Test Results link on the Predeployment Test Start Page to view thePredeployment Test Results.Task: To generate Predeployment Test results:1. Launch the Predeployment Test tool. The Predeployment Test Start Page opens.2. Select View Predeployment Test Results. The Predeployment Test Results By Job Report opens in a Webbrowser, listing all of the test-ready packages that you have installed. All of the other reports can be accessedfrom this report.
