Console Commands for Novell Cluster Services 207novdocx (en) 7 January 2010For example, enter the following commands in the order shown, using the values for yourparticular solution:/opt/novell/oes-install/util/extend_schema --port 636 cn=admin,o=examplepas5W0rd 10.1.1.1 /opt/novell/ncs/schema/ncs.ldif/opt/novell/oes-install/util/extend_schema --port 636 cn=admin,o=examplepas5W0rd 10.1.1.1 /opt/novell/ncs/schema/ncpserver.preldifA.4 SBD UtilityThe SBD utility (sbdutil) allows you to create, find, or view a Novell Cluster Services SBDpartition.IMPORTANT: The cluster SBD partition is not required unless you have shared storage in thecluster.We recommend that you carve out a LUN/disk of 20 MB in size to use for the SBD. If you mirror theSBD, you need to carve out a separate LUN/disk of equal size to use. Before you begin, each ofthese small disks must be initialized and marked as shareable for clustering. You can initialize thedevice by using NSSMU or the Storage plug-in to iManager. In OES 2 SP2, the NSS utility calledncsinit is available for initializing a device and setting it to a shared state.Syntaxsbdutil [-c|-f|-i|-v] [-s] [-d device] [-d device] [-p partition] [-ncluster_name]Enter the command at a terminal console prompt as the root user or any other user in admin orncsgroup.Options-cCreate an SBD partition. This option requires at least one device to be specified. You can createa mirrored SBD by supplying more than one device with multiple instances of the -d option.-fFind the SBD partition.Parameter Description Exampleport_num The port number you assigned for eDirectorycommunications in the tree where you plan toinstall clusters. The default port is 636.636admin_username The typeful fully distinguished username of theadministrator who has the eDirectory rightsneeded to extend the schema.cn=admin,o=exampleadmin_password The password of the administrator user. pas5W0rdserver_ip_address The IP address of the eDirectory server thatcontains the schema files.10.10.10.1
