4.2 Setting PTZ Presets, Patrols & PatternsBefore you start:Please make sure that the presets, patrols and patterns should be supported by PTZ protocols.4.2.1 Customizing PresetsPurpose:Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takesplace.Steps:1. Enter the PTZ Control interface.Menu>Camera>PTZ2. Use the directional button to wheel the camera to the location where you want to set preset; and the zoomand focus operations can be recorded in the preset as well.3. Enter the preset No. (1~255) in the preset text field, and click the Set button to link the location to thepreset.Repeat the steps2-3 to save more presets.You can click the Clear button to clear the location information of the preset, or click the Clear All buttonto clear the location information of all the presets.4.2.2 Calling PresetsThis feature enables the camera to point to a specified position such as a window when an event takes place.Steps:1. Click the button PTZ in the lower-right corner of the PTZ setting interface;Or press the PTZ button on the front panel or click the PTZ Control icon in the quick setting bar, orselect the PTZ option in the right-click menu to show the PTZ control panel.2. Choose Camera in the dropdown list.3. Click the button to show the general settings of the PTZ control.4. Click to enter the preset No. in the corresponding text field.5. Click the Call Preset button to call it.NOTEWhen the Coaxitron camera/dome connected and the PTZ protocol is selected to ) or PELCO-C(Coaxitron), you can call the preset 95 to enter the menu of the connected Coaxitron camera/dome. Use thedirectional buttons on the PTZ control panel to operate the menu.29
