8.1 Setting Motion Detection1. Enter Motion Detection interface of Camera Management and choose a camera you want to set up motiondetection.Menu> Camera> Motion2. Set detection area and sensitivity.Check checkbox to enable motion detection, use the mouse to draw detection area(s) and drag thesensitivity bar to set sensitivity.Click to set alarm response actions.3. Click Trigger Channel tab and select one or more channels which will start to record or becomefull-screen monitoring when motion alarm is triggered.4. Set arming schedule of the channel.Select Arming Schedule tab to set the channel’s arming schedule.Choose one day of a week and up to eight time periods can be set within each day. Or you can click theCopy button to copy the time period settings to other day(s).NOTETime periods shall not be repeated or overlapped.5. Click Linkage Action tab to set up alarm response actions of motion alarm (please refer to Chapter 8.7Setting Alarm Response Actions).Repeat the above steps to set up arming schedule of other days of a week.Click the OK button to complete the motion detection settings of the channel.6. If you want to set motion detection for another channel, repeat the above steps or just copy the abovesettings to it.NOTEYou are not allowed to copy the “Trigger Channel” action.62
