NOTE The indicates the start time and end time of the record files. represents normal recording (manual or schedule); represents event recording (motion, alarm,motion | alarm, motion & alarm). Playback progress bar: use the mouse to click any point of the progress bar to locate special frames.6.1.3 Playing Back by Event SearchPlay back recording files on one or several channels searched out by restricting event type (e.g. alarm input andmotion detection).Steps:1. Enter the Playback interface.Menu > Playback2. Select the Event in the drop-down list on the top-left side.3. Select Alarm Input or Motion as the event type, edit the Start time and End time.4. Click Search button to get the search result information. You may refer to the right-side bar for the result.5. Click button to play back the file.You can click the Back button to back to the search interface.NOTEPre-play and post-play can be configured.6. (Optional) If multiple channels are triggered recording by the alarm input, clicking the button willpop up a synchoronouse playback channel selection window. Select channel(s) you want to play and clickthe OK button.7. Playback management.The toolbar in the bottom part of Playback interface can be used to control playing process.Stop /Pause play/ Play/Single-frame play 30s reverse30s forward Speed down Speed upPrevious day Next day /Scaling up/down thetime lineFull Screen Exit Video typeProcess bar Video type bar47
