Nuvo Essentia NV-E6GMS-UK Installation Manual

Also see for Essentia NV-E6GMS-UK: Installation guide

Nuvo Essentia NV-E6GMS-UK Installation Manual Manual pdf 23 page image

193.1 Select or Edit Source (Fig. 18)Double-clicking on a blank source will open the “SelectSource” window. This window assigns the appropriate sourcenumber input. The “Display Name” is the text that will beread on the Control Pad when that source is selected in anyzone. The display name can contain only capital letters,numbers, and some punctuation. If an invalid key is typed, itwill be ignored.The “Make” field defines the manufacturer of theequipment. A drop-down menu allows you to choose asource from the IR Library. The “Model” field provides adrop-down menu that allows you to choose the specificpiece of source equipment from the selected manufacturer.An important feature of the “Select Source” window is the“Gain” level control. Different pieces of source equipmenttend to have different levels of audio output signal. Thisslider control allows you to compensate for equipment thathas an inherently lower volume level. By using thisadjustment, when switching between sources, relativevolume levels remain constant.When the appropriate information is complete, click “OK.”This will add the updated source information to the “Source”window. When all the desired sources have been defined, goto “Next” and proceed to the “Macros” setup.Fig. 18Adding a NuVoNet Source (Fig. 19)NuVoNet sources can be placed in the Configuration with thesame procedure as third party IR controllable equipment.The Configurator program contains IR libraries for each ofthe NuVoNet components which have the appropriate buttonfunctions pre-assigned. Even though the components areassigned, you must still set the NuVoNet source inputs oneach of the components, see Setting NuVo Sources for usewith NuvoNet, pg. 12.Fig. 192.6 Cleaning Up an IR LibraryUnused IR codes can be deleted from the list by highlightingthe code and either clicking the ”Delete” button or right-clicking and selecting “Delete.”When you are finished editing the library, select “Done.”3. Defining SourcesThe “Sources” tab allows you to define the sourcecomponent attached to each of the six source inputs. All sixsources are not needed, but at least one source must bedefined.