Nuvo NV-D460 Installation Manual

Also see for NV-D2120: Installation guide Installation guide

Nuvo NV-D460 Installation Manual Manual pdf 34 page image

Slaved To ZoneNoneKitchenDining RoomMaster BedroomMaster BathGuest RoomNurseryRemote Controls:AllRemotes EnabledNuVo Remote OnlyAllRemotes DisabledSlaved to Zone:These settings affect the way theControl Pad receives commands from a handheldwireless remote. The NV-GRC1 is the system remote thatcomes with the Grand Concerto. It allows the same levelof control as the Control Pad. At the default setting,, this remote and any third-party IRremote will be received by the zone's Control Pad. Insome instances, you may not want a third-party remotecommand to be received by the Control Pad. In this case,you would choose . If the zone is in anarea that is flooded with sunlight or receivesinterference from plasma displays, the best choice is.A feature of Grand Concerto is the abilityto slave zones together. This is most useful forcontrolling a zone with more than one Control Pad, orthe converse, which is controlling more than one zonewith one Control Pad. Simply scroll to the zone you wishto slave to and select it from the list, Fig. 45 .Zone Number:Slaved ZoneDiagnostic Self Test:Each zone must be assigned a number orspecific zone address. This is done by scrolling to thedesired zone and selecting it. All used zone addresseswill be grayed out. If you have defined zones in theConfigurator Software, the actual zone names assignedin the Zone tab of the software will appear in the list.The zone list appears just as it does in the previousmenu. Scrolling to a different zone nameand pressing OK will set a new zone address, orselecting NONE erases the zone address.This performs a short displayparameter test when selectedFig. 45Fig. 46Source Settings:Gain:NuVoNet Source:Two choices reside in this menu, Fig. 46.This lets you increase the audio input levels fromthe sources coming into the Grand Concerto. This is notnecessary for the NuVoNet components, but if you use asatellite or cable set-top box as an audio source for thesystem, you will find that the audio level is inherentlysofter and will benefit by the gain setting. The default is0dB, with a range up to 18.75dB.If you uncheck this selection, thatsource will not be polled by NuVoNet and will only be IRcontrollable.Cur. Source SettingsGainNuVoNet SourceSystem Settings: This menu option controls system-widesettings, Fig 47.System SettingsDate/Time24 Hour Time DisplayPower-Off ModeFig. 47*Advanced30