N V I D I A C o r p o r a t i o n 40N V I D I A D i s p l a y P r o p e r t i e s R e l e a s e 4 0 U s e r ’ s G u i d eEnabling nView Dualview Mode for the First Time:Windows 2000Note: When you start Windows 2000 with an NVIDIA GPU-based multi-display graphics card (or multiple NVIDIA GPU-based graphics cards),you are not yet in “Dualview” mode*. You can confirm this when youview the Windows Display Properties Settings panel and see only onemonitor image in the display.The NVIDIA Desktop Utilities settings panel contains an option that lets youenable “Dualview” mode under Windows 2000. Follow these steps to enableDualview.1 Make sure you have a multi-display NVIDIA GPU-based graphics card, ordual graphics cards, properly installed in your computer and securelyconnected to your display devices.2 Ensure that you have more than one display device attached to your multi-display graphics card and that the display devices are turned on.3 Confirm that the NVIDIA Display Driver software (including the nViewDesktop Manager component) has been installed on your system.4 Start up Windows.5 From your desktop, right click to view the properties menu.6 Click Properties > Settings (tab) > Advanced > the NVIDIA GPU tab >Desktop Utilities option from the Media Center menu to display theNVIDIA Desktop Utilities panel.7 Click the Enable Dualview (Treat multiple outputs . . . ) option to enable it(Figure 5.5).and click Apply. The prompt in Figure 5.6 appears.
