OAKWORKS CFPM300 User Manual

Also see for CFLU401: User manual User manual

OAKWORKS CFPM300 User Manual Manual pdf 17 page image

14The Imaging Tables come completely assembled and ready to use. Plug the cord into a functioning outletthat is rated for the table. (see Grounding below)IMPORTANT - If the Foot Control is ordered, you must install a Foot Control Cradle per InstallationInstruction part number MMINMD0008-EN.Arrange the power cord and control cords so that they will not create a tripping hazard and where thecontrols are located to your liking and are conveniently accessible.Be sure access to plug is not blocked for disconnecting the table from power.This product must be grounded. If it should malfunction or break down, groundingprovides a path of least resistance for electrical current to reduce the risk of electricshock. This product is equipped with a cord having an equipment-grounding conductorand a grounding pin. The pin must be plugged into an appropriate outlet that is proper-ly installed and grounded in accordance with all local codes and ordinances. See U.S.sample below.Improper connection of the equipment-grounding conductor can result in a risk of elec-tric shock. Check with a qualified electrician or service person if you are in doubt asto whether the product is properly grounded. Do not modify the plug provided with theproduct - if it will not fit the outlet; have a proper outlet installed by a qualified electri-cian.Correct Implementation Incorrect Implementation Grounding MethodsRisk of Electric Shock - Connect this furnishing to a properly grounded outlet only.DANGERINSTALLATIONG R O U N D I N G