OHAUS Adventurer Pro Grain Instruction Manual

OHAUS Adventurer Pro Grain Instruction Manual Manual pdf 14 page image

Adventurer Pro Grain Test ScaleEN-123.5.2 Menu NavigationThe Adventurer Pro Grain Test menu structure consists of three levels. The top level is the mainmenu which consists of a number of sub-menus.CALIBRATION SETUP READOUT MODE UNIT PRINT-1 PRINT-2END LOCKOUT RESET GLP PRINT GLP DATA RS232-2 RS232-1TOP LEVELEND RS232 POWERBAUDHANDSHAKEPARITY7 EVEN8 NOP7 ODD7 NOPSECOND LEVELBOTTOM LEVELThe second level of the menu structure is thesub-menu level. Each sub-menu is a loop thatconsists of a number of menu items.The bottom level of the menu structure is themenu item level. Each menu item level consistsof two or more settingsTypical Sub-menuTypical Menu ItemTypical Setting3.5.3 Changing SettingsTo change a menu setting, perform the following steps:ENTER THE MENUPress and hold theMenu button until MENU appears on the primary (7-Segment) display.Release the button and the first sub-menu appears on the secondary (14-Segment) display(blinking).Note: When the secondary display is blinking, press Yes to accept.Press No or Back or view another selection.SELECT THE SUB-MENUPress the No button to select the next sub-menu or the Back button to select the previous sub-menuin the loop. Press the Yes button to select the sub-menu that appears on the secondary display(blinking). The sub-menu name now appears on the primary display and the first menu item in thesub-menu now appears on the secondary display (blinking).SELECT THE MENU ITEMPress the No button to select the next setting or the Back button to select the previous setting in theloop. Press the Yes button to select and save the setting on the secondary display (blinking) as thenew menu item setting.EXIT THE MENUPress the Exit button at any time to quickly exit the menu or select END sub-menu and press the Yesbutton.Enter