OHAUS Adventurer Pro Grain Instruction Manual

OHAUS Adventurer Pro Grain Instruction Manual Manual pdf 20 page image

Adventurer Pro Grain Test ScaleEN-18First the zero reading is taken. Next the display shows thefirst calibration weight value. PUT WEIGHT (blinking) isdisplayed. Place the specified calibration weight on thepan.After a few seconds, place the second specified calibrationweight on the pan. PUT WEIGHT (blinking) is displayed.After a few seconds, the calibration weight is displayed.LINEAR DONE is momentarily displayed when calibration iscompleted.After calibration, remove weight from pan. To leave themenu, press Exit.To abort calibration at any time, press the Exit button.3.7.2 Calibration MassesModel Linearity Span Weight ClassCalibration Points Calibration Points ASTM OIMLAVD4102N 2000g / 4000g 2000g, 3000g, 4000g 1 E2Calibration TestCalibration test allows a check of a known calibration massagainst the last stored calibration information in the scale.Press and hold theMenu-Cal button until MENU CALIBRATEis displayed.Press Yes to enter calibration.Press No until CAL TEST is displayed.Press Yes and follow the screen instructions.Place the specified weight on the pan. After a short period,the display indicates the difference in weight from the lastcalibration, and then will display the calibration weight onthe pan. After the test, remove the calibration weight from thepan. To leave the menu, press Exit.Linearity Calibration (Cont.)