OHAUS Adventurer Pro Grain Instruction Manual

OHAUS Adventurer Pro Grain Instruction Manual Manual pdf 30 page image

Adventurer Pro Grain Test ScaleEN-28Symptom Possible Cause RemedyError 9.5 • Production calibration • Return scale for service.not present.Error 9.8 • User calibration data not • Calibrate scale.present. (Required forLFT ON only)Error 53 • EEPROM checksum error. • Cycle power on, off. I fscale fails to operate,return for service.LOW REF WT • Average piece weight too • See section 3.6.3.small. (Warning)REF WT Err • Reference weight too small • Increase sample size.The weight on the pan istoo small to define a validreference weight.------ • Busy (tare, zero, printing) • Wait until completion.4.3 Troubleshooting (Cont.)4.4 Service InformationIf the Troubleshooting section does not resolve or describe your problem, contact your authorizedOhaus Service Agent. For Service assistance or technical support in the United States, call toll-free1-800-526-0659 between 8:00 AM and 5:00 PM EST. An Ohaus product service specialist willbe available to provide assistance. Outside the USA, please visit our web site, www.ohaus.com tolocate the office nearest you.4.5 PartsDescription Ohaus Part NumberAC adaptersOutput: 12 VAC 500 mA• US 120V/60Hz 12102320