Introduction31Remote SetupThe Remote Setup software allows you to configure network settings from a Windows® or Macintosh ® (MacOS® X 10.2.4 or greater). (See Chapter 5 for Windows® and Chapter 11for Macintosh ® of the Software User’sGuide on the CD-ROM).Types of Network ConnectionsGenerally speaking, there are two types of networks: A Peer-to-Peer network and a shared Network.Network Connection ExamplePeer-to-Peer printing using TCP/IPIn a Peer-to-Peer environment, each computer directly sends and receives data to each device. There is nocentral server controlling File access or Printer sharing.■ In a smaller network of 2 or 3 computers, we recommend the Peer-to-Peer printing method as it is easierto configure than the Network Shared Printing method described on the following page. See NetworkShared Printing on page 4.■ Each computer must use the TCP/IP Protocol.■ The Océ machine needs an appropriate IP address configuration.■ If you are using a router, the Gateway address must be configured on the computers and the Océmachine.TCP/IPTCP/IPWindows RWindows RWindows RNetwork printer (your machine)Switch orRouter
