Control Panel Setup163Subnet MaskThis field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP toobtain the subnet mask, enter the desired subnet mask. Check with your network manager for the subnetmask to use.1 Press Menu, 7, 1, 3.2 Select 1 to change. Enter the Subnet Mask address.3 Press OK.4 Press Stop/Exit.GatewayThis field displays the current gateway or router address used by the machine. If you are not using DHCP orBOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have agateway or router, leave this field blank. Check with your network manager if you are unsure.1 Press Menu, 7, 1, 4.2 Enter the Gateway address.3 Press OK.4 Press Stop/Exit.Node NameYou can register the machine name on the Network. This name is often referred to as a NetBIOS name; andis the name that is registered by the WINS server on your network. Océ recommends the nameBRN_XXXXXX (where XXXXXX is the last six digits of the Ethernet address) (up to 15 characters).1 Press Menu, 7, 1, 5.2 Select 1 to change. Enter the Node Name.3 Press OK.4 Press Stop/Exit.